If an ICG IC6, IC7, IC8 Bike has a battery with low voltage out of the box and the battery icon is blinking, pedaling the bike at a cadence of >50 revolutions per minute (RPM) will supply the system with enough energy to set up the bike and start charging the battery while pedaling.
- After initial setup, the bike can be used when bike is being pedaled.
- When the bike is being used for the first time or has been sitting for a prolonged period of time, the battery icon may be blinking where there may not be enough power to keep the console on without pedaling the bike. The battery will be sufficiently charged after a 45 minute indoor cycling class. After an initial indoor cycling session, the battery will be charged and battery icon will not be visible.
- The battery will be fully charged after approx. 2 -3 indoor cycling classes.
Note: Metrics like WATTs and RPM only appear above a certain RPM. No value “- -" will be displayed after 5 seconds below minimum RPM, and the console will enter the pause mode.
See the following from the ICG Bike Console Owner's Manuals for more details:
