Hammer Strength HD Air Bike Preventative Maintenance and Schedule
Preventive Maintenance Schedule
| Item | Weekly | Monthly | Biannually |
| Console Overlays | Clean | Inspect | |
| Bottle Holders / Accessory Trays | Clean | Inspect | |
|
Console Mounting Bolts |
Inspect | ||
| Hardware | Inspect | ||
| Frame | Inspect | ||
| Seat Adjustment | Clean and Lubricate every two weeks | ||
| Seat Post | Clean | Lubricate | Inspect |
| Plastics Covers | Clean | Inspect | |
| Leg Levelers | Inspect / Adjust | ||
| Pedals / Straps | Clean | Inspect |
Clean and Lubricate Seat Adjustments
Perform this task every two weeks.
1. Loosen seat post adjustment knob and raise seat to highest position.
| Item | Description | Qty |
| 1 | Seat Post | 1 |
| 2 | Seat post adjustment knob | 1 |
2. Clean the entire seat post with a mild cleaner and soft cloth.
3. Return seat post to lower position.
4. Clean the seat with a mild cleaner and soft cloth.
| Item | Description | Qty |
| 1 | Seat | 1 |
| 2 | Seat adjustment rail | 1 |
5. Clean seat adjustment rail with a mild cleaner and soft cloth.
6. Lubricate seat adjustment rail with a small amount of lithium grease
Lubricate Seat Post Adjustment Knob
Perform this task every month.
1. Unscrew seat post adjustment knob from seat tube on frame.
| Item | Description | Qty |
| 1 | Lubricate seat adjustment knob here | 1 |
| 2 | Seat tube on frame | 1 |
2. Lubricate threads of seat post adjustment knob with lithium grease
Preventive Maintenance Tips
NOTE: Safety of the equipment can be maintained only if the equipment is examined regularly for damage or wear. Keep the equipment out of use until defective parts are repaired or replaced. Pay special attention to parts that are subject to wear, as outlined below.
The following preventive maintenance tips will keep the product operating at peak performance:
• Locate the product in a cool, dry place.
• Clean the display console and all exterior surfaces with an approved or compatible cleaner (see Approved and Compatible Cleaners) and a microfiber cloth.
• Long fingernails may damage or scratch the surface of the console; use the pad of the finger to press the selection buttons on the console.
• Clean the top surface of the pedals regularly.
NOTE: When cleaning the exterior of the unit, a non-abrasive cleaner and soft cotton cloth are strongly recommended. At no time should cleaner be applied directly to any part of the equipment.
Approved and Compatible Cleaners
Two preferred cleaners have been approved by reliability experts: PureGreen 24 and Gym Wipes. Both cleaners will safely and effectively remove dirt, grime and sweat from equipment. PureGreen 24 and the Antibacterial Force formula of Gym Wipes are both disinfectants that are effective against MRSA and H1N1. PureGreen 24 is available in a spray which is convenient for gym staff to use. Apply the spray to a microfiber cloth and wipe down the equipment. Use PureGreen 24 on the equipment for at least 2 minutes for general disinfection purposes and at least 10 minutes for fungus and viral control.
Gym Wipes are large, durable pre-moistened wipes to use on the equipment before and after workouts. Use Gym Wipes on the equipment for at least 2 minutes for general disinfection purposes.
Contact Customer Support Services to order these cleaners (1-800-351-3737 or email: customersupport@lifefitness.com).
Mild soap and water or a mild non-abrasive household cleaner can also be used to clean the display and all exterior surfaces. Use a soft microfiber cloth only. Apply the cleaner to the microfiber cloth before cleaning. DO NOT use ammonia or acid based cleaners. DO NOT use abrasive cleaners. DO NOT use paper towels. DO NOT apply cleaners directly to the equipment surfaces.
See the Hammer Strength HD Air Bike Owner's Manual for more information