SCIFIT StepOne Stepper Console and Console Bracket Replacement Instructions
Note: When replacing a console on the SCIFIT StepOne Stepper, make sure to re-use the console bracket part A5044 and four screws part 91218 on the replacement console shown in Step 3 . Console bracket and screws will need to be ordered separately on the the LF Parts Store for Out of Box console orders.
Step 1:
Step 2:
Step 3
Note: When replacing a console on the SCIFIT StepOne Stepper, make sure to re-use the console bracket part A5044 and four screws part 91218 on the replacement console shown in Step 3 . Console bracket and screws will need to be ordered separately on the the LF Parts Store for Out of Box console orders.
Step 1:
Use a 1/2" socket to remove the two 5/16-18 x 1/2" flange bolts part 19651 that secure the console bracket to the frame
Step 2:
Carefully pull the console away from the frame, then disconnect the
Communication
cable and
Mid-step-counter
cable from the console
Step 3
Use a phillips screwdriver to remove the four M5 x 12mm Screws part
91218
securing the StepOne Console Bracket part
A5044
to the console, then remove the bracket.