Applies to: Atmos Treadmill, Cross-Trainer, Upright Bike, and Recumbent Bike — SE4 Console
Manager’s Configuration is the settings area behind your SE4 touchscreen. Use it to connect to Wi-Fi, turn entertainment apps on or off, and change ErP energy-saving mode. This article shows the tap sequence that opens System Options, which settings are worth changing, and where to set your weight and units more easily.
Read the steps below, or watch the short video.
How to open it
- Start on the home screen and tap the Language icon.
- On the Select Language screen, tap the bottom of the screen in this order: lower-left, lower-right, lower-left, lower-right.
- System Options opens. From here, tap Configuration, then Manager, to reach the settings list.
| Tap inside the dark panel at the bottom of the screen, not the very edge of the bezel. If nothing happens, go back to the home screen and try again with slightly slower, more deliberate taps. |
What you might actually want in here
| Setting | Why you would open it |
| Wireless Connectivity | Connect your equipment to your Wi-Fi. This is the one most people need — streaming classes, Interactive Terrains, and software updates all depend on it. |
| Apps | Turn individual entertainment apps on or off, so the Entertainment screen shows only what you use. |
| ErP Mode | How long your equipment waits before dropping into energy-saving sleep. See the ErP Mode article. |
| Units and weight | Imperial or metric, and your default weight. These are also on the ordinary Settings screen, which is easier to reach. |
Important The rest of System Options is intended for service technicians. Changing settings under Service, System Test, Maintenance, Network, or Export / Import Settings can affect how your equipment runs. If you are unsure what something does, leave it alone and contact Customer Support Services. |
Changing units or your weight without going in here
You do not need Manager’s Configuration for either. On the home screen, open Settings and you can switch between imperial and metric, enter your weight, change the language, and connect Bluetooth devices. That is the right place for day-to-day changes.
Troubleshooting
- The tap sequence does not open anything. You have to be on the Select Language screen, not the home screen, and your taps need to land inside the dark panel along the bottom. Try again more slowly.
- I changed something and want it back. Note the original value before changing anything so you have it to return to. If you cannot recover it, contact Customer Support Services.
- I cannot find Wi-Fi settings. They are under Wireless Connectivity in System Options, not under Configuration.
Safety Do not change settings while someone is using the equipment. If you raise a speed, incline, or level limit, make sure everyone who uses it knows the limits have changed. |