Applies to: Atmos Home Cross-Trainer, Upright Bike, and Recumbent Bike — SL Console
Manager’s Configuration is the settings menu on your SL console. Use it to switch between miles and kilometers, change the language, set the maximum workout time, connect to Wi-Fi for software updates, turn on ErP energy-saving mode, or immobilize your equipment. This article shows the key sequence that opens the menu, how to move through it, and what each setting does.
Read the steps below.
How to open it
- Start with the console awake but no workout running. If the display is dark, pedal for a few seconds.
- Press the LEVEL arrows in this order: UP, DOWN, UP, DOWN. These are the level keys, not the time keys.
- Press STOP. The menu opens at the software version.
| This is the one place the cross-trainer and bikes differ from the treadmill. A treadmill uses its SPEED arrows; your equipment has no speed keys, so it uses the LEVEL arrows instead. |
Moving around the menu
| Key | What it does |
| Any arrow key | Moves through the list of settings, and toggles between the options once a setting is open. |
| ENTER | Opens the setting you have landed on, and confirms your selection. |
| STOP | Exits the menu. |
Settings worth knowing
| Setting | What it controls |
| Units | Whether distance and speed display in miles or kilometers. |
| Language | The language shown on the console. |
| Sound | Console tones and key beeps. |
| Max Time | The longest a single workout can run. |
| Pause Time | How long the console stays paused, after you press STOP once, before the workout ends. |
| Marathon Mode | On or off. |
| ErP Mode | The energy-saving sleep mode. See the ErP Mode article. |
| Radios / Connectivity | Wi-Fi and Bluetooth. Wi-Fi is what lets your equipment receive software updates. |
| Immobilize | Locks your equipment so it cannot be used until you turn this off again. |
The menu also holds service items you can safely leave alone: Maintenance, serial number, SKU, ATO, Reboot, Diagnostics, and Software Update.
Important This menu includes service and diagnostic settings that change how your equipment behaves. Adjust only the settings you recognize. If you are unsure what a setting does, leave it alone and contact Customer Support Services. |
Troubleshooting
- The key sequence does not open anything. Check you are using the LEVEL arrows rather than the TIME arrows, and that no workout is running. Press the four arrows in an even rhythm, then STOP.
- The console goes dark partway through. On a self-powered unit the battery may be low. Pedal for ten minutes to put some charge back in, then try again. See the article on keeping your console charged.
- My equipment will not start and says it is immobilized. Immobilize is switched on. Open this menu, scroll to Immobilize, and set it to OFF.
Safety Do not change settings while someone is using the equipment. If you raise the maximum time or level, make sure everyone who uses it knows the limits have changed. |